671N Detroit Diesel, RC model, N65 injectors, two screw rack.
New Style Block, four valve head, new full flow spin on oil filter with a new AC Delco K4 filter adaptor
New Donaldson spin on fuel filters and new Detroit aluminum filter heads, limited speed mechanical governor,
aluminum valve cover with center breather, SAE #2 cast iron flywheel bell housing with low mount starter,
12V Delco 40 MT starter, fan drive, (aluminum fan is available) bottom alternator holding bracket, crank mounted vicous vibration dampener, front trunion type motor mount, center dump industrial exhaust manifold with flange and short threaded flex, 2 port air inlet housing with emergency air box shutdown flap and with dual (outdoor type) oil bath breathers, two piece cast iron oil pan, two piece pistons (cross-head pistons) with steel crown and aluminum skirt.

New inspection port cover gaskets, new water pump, new coolant drain petcocks all around, air box cleaned and drains checked, new short type dipstick and dipstick tube, new thermostat, new oil (or oil drained for shipment), fresh paint and test run.

This engine came from a vocational technical college and has very low hours on it. I was told by the long time instructor that the head and pan had never been removed since they owned it. It was there to teach valve, injector and rack setting.

SOLD

Located at 5917 Hwy 90 East in Broussard, LA 70518
Call at 985-384-9517 or www.triplecmarine.com